BRTP06ISS0PC
Product lntroduction
BRTP06ISS0PC swing-arm robot is applicable to all types of horizontal injection machine of 30T-150T for take-out products and sprue. Vertical arm is single type.Its up and down,drawing, spinning out, spinning in are driven by air pressure.High speed, high efficiency.It is an economical manipulator.
Product parameter(specification)
Model |
Recommendedl.M.M(ton) |
Crosswise Stroke(mm) |
Vertical Stroke(mm) |
Max.Loading(kg) |
Net Weight(KG) |
BRTP06ISS0PC |
30T-150T |
120 |
650 |
2 |
36 |
Product feature and application
The product is suitable for the injection industry of small objects out; It is especially suitable for taking out small plastic objects such as gaskets, gears, bearings and sliding parts used in household appliances.
Maintenance inspection items and expired
The inspection items and expiration dates are as follows, please implement them:
NO. |
Range |
Time |
1 |
Check if the suction cups, clip and suction are functioning properly |
Every day |
2 |
Two-point combination (air source two-piece) drainage |
Every day |
3 |
Fixture fixing screws Every day 4 Air compressor drainage |
Every day |
4 |
Air compressor drainage |
Every day |
5 |
Injection machine cable, operator connector cable |
Every day |
6 |
Check if the mechanism is loose |
Every day |
7 |
Pull-out guide rod, slide rail lubrication |
Every week |
8 |
Upper and lower rails, slider lubrication |
Every month |
9 |
Air pressure pipeline connection, whether speed adjustment is normal |
Every month |
10 |
Clean appearance |
Every week |
11 |
Check vacuum generator function |
Every month |
12 |
Inspection of base fixing screws |
Every month |
13 |
Hydraulic buffer checking |
Every month |
14 |
Air compressor and wire and cable replacement |
Three year |
Note: When any abnormality of the machine is found, the machine must be stopped for inspection, and no abnormality can be checked before maintenance. The above table is for reference only
http://www.borunte.net/